Profibus

SIMATIC ET 200SP, BUSADAPTER BA-SEND BA1XFC, 1X FAST CONNECT TERMINAL FOR ET-CONNECTION

SIMATIC ET 200SP, Digital input module, DI 8x 24V DC Standard, type 3 (IEC 61131), sink input, (PNP, P-reading), Packing unit: 1 piece, fits to BU-type A0, Colour Code CC01, input delay time 0,05..20ms, module diagnostics for: short-circuit of sensor supply, wire break, supply voltage

SIMATIC ET 200SP, BaseUnit BU20-P12+A0+4B, BU type B1, Push-in terminals, without AUX terminals, bridged to the left, WxH: 20 mmx117 mm

PB FC RS 485 PLUG 180, PB-PLUG WITH FASTCONNECT CONNECTOR AND AXIAL CABLE- OUTLET F. INDUSTRY PC, SIMATIC OP, OLM, TRANSMISSION RATE: 12 MBIT/S, TERMINATING RESISTOR WITH SEPARATING FUNCTION, PLASTIC HOUSING

SIMATIC ET 200SP, Digital input module, DI 8x 24V DC SRC BA, type 1 (IEC 61131), source Input (NPN, M-reading) Packing unit: 1 piece, fits to BU-type A0, Colour Code CC02, input delay time 0,05..20ms, module diagnostics for: supply voltage

SIMATIC DP, ELECTRONIC MODULES FOR ET200PRO 4 DO DC 24V, 2.0A HIGH FEATURE, CHANNEL DIAGNOSTICS; SHORT CIRCUIT AND WIRE BREAK; INCLUSIVE BUS MODULE CONNECTING MODULE IO 6ES7194-4..00-0AA0 MUST BE ORDERED SEPERATELY

SIMATIC DP, terminal module TM-IM/EM60S for ET200iSP, for holding the IM152-1 and an electronic module, screw terminals, incl. power bus termination module

SIMATIC ET 200SP, 5 BU-COVER, 15MM, TO PROTECT EMPTY SLOTS

SIMATIC DP, ET 200eco PN, F-DI 8x24V /F-DQ 3x24V 2A , M12 PROFIsafe, up to PL E (ISO 13849), up to SIL 3 (IEC 61508), protection IP65/67

PB BUS CONNECTOR WITH AXIAL CABLE OUTLET F.INDUSTR. PC, SIMATIC OP, OLM; TRANSMISSION RATE 12 MBIT/S; TERMINATING RESISTOR WITH SEPARATING FUNCTION, METAL HOUSING

SIMATIC DP, BUS CONNECTOR FOR PROFIBUS UP TO 12 MBIT/S 90 DEGREE ANGLE OUTGOING CABLE, 15,8 X 64 X 35,6 MM (WXHXD), TERMINAT. RESIST. WITH ISOLAT. FUNCTION, WITHOUT PG SOCKET

SIMATIC ET 200SP, ANALOG INPUT MODULE, AI 2 X U/I 2-,4-WIRE HIGH SPEED FITS TO BU-TYPE A0, A1, COLOR CODE CC00, CHANNEL DIAGNOSIS, 16BIT, +/-0,3%

SIMATIC ET 200SP, BaseUnit Type C1, BU20-P6+A2+4B BU type C1, Push-in terminals, with 2 AUX terminals, bridged to the left, WxH: 20 mmx117 mm

SIMATIC DP, electronics module for ET200iSP, 4 AI HART, 2DMU, for connecting HART 2-wire transmitters

SIMATIC DP, CONNECTING MODULE FOR DIGITAL (4DO UND 4 DO HF) ELECTRONIC MODULES ET 200PRO 4 X M12 WITH 2 X M12 SINGLE-ASSIGNEMENT, 2 X M12 DOUBLE-ASSIGNEMENT

SIMATIC DP, Connection plug for PROFIBUS up to 12 Mbit/s 90° cable outlet, 15.8x 72.2x 36.4 mm (WxHxD), Insulation displacement method FastConnect, without PG socket

SIMATIC DP, ET 200ECO PN, 8 DO DC 24V/1,3A; 4 X M12, DOUBLE-ASSIGNEMENT, DEGREE OF PROTECTION IP67;

SIMATIC DP, ET200PRO CONNECTING MODULE FOR FAILSAFE ELECTRONIC MODULE F-SWITCH PROFISAFE

SIMATIC ET 200SP, Relay module, RQ NO 4x 120V DC..230VAC/5A ST. 4 normally open contacts, isolated contacts, packing unit: 1 piece, fits to BU-type B0 and B1, Colour Code CC40, substitute value output, module diagnostics for: supply voltage

SIMATIC DP, ET 200PRO FAILSAFE ELECTRONIC MODULE 4/8 F-DI/ 4 F-DO DC24V/2A PROFISAFE, 90 MM WIDTH, UP TO CATEGORY 4 (EN954-1)/ SIL3 (IEC61508)/PLE (ISO13849),