BALLUFF

BES02WY Inductive sensor, DC 3/4-wire: Inductive sensor, plug connector, NC (NC), PNP, Sn = 6.00 mm, quasi-flush, M12x1,

BFO005R Fiber Optic, 2m IP65, M3 Standard

BIS0078 RFID read / write head, M18, BIS C (LF, 70 kHz), 5m

BCC02H6 Connector can be assembled: plug connector, M12 socket, angled

BCC00T8 Field attachable connector, M12 5-pin Screw terminals IP67

BMF 303, bracket BAM00L0 for pneumatic cylinder with integrated groove, material CuZn

BMF 303, bracket BAM00L4 for pneumatic cylinder with integrated groove, material CuZn

BMF003A Magnetic field sensor, 25.5 mm x 3.00 mm x 4.50 mm, PNP, normally open (NO), operating voltage 10.0 V - 30.0 V DC, DC voltage, rated switching field Hn 1.2 kA / m, protected Field strength Ha 2.0 kA / m, switch-on delay sound max. 0.05 ms, switch-off delay toff max. 0.05 ms, Connection type cable, Housing material LCP, short-circuit-proof, reverse polarity protected, IP67, CE, Bracket angle e. BMF 305-HW-28 not included

BMF Bracket BAM00LP for BMF 305

BMF0066 Magnetic sensor for cylinder Connector, M08x1-S49 PNP/Normally open (NO) 24V DC

BNS03A6 Photoelectric Sensor

BOS011R Photoelectric Sensor

Optoelectronic Sensor BOS0057

BWL001F Photoelectric Sensor