SIEMENS

SIMOTICS S-1FL6 Operating voltage 230 V 3AC PN=0.1kW; NN=3000rpm M0=0.32Nm; MN=0.32Nm Shaft height 20 mm Incremental encoder TTL 2500 incr./rev. With feather key Tolerance N without holding brake Degree of protection IP65 with sealing ring compatible with

SIMOTICS S-1FL6-1FL6 Operating voltage 3AC 400V PN=1kW; NN=2000rpm M0=6Nm; MN=4.78Nm Shaft height 65 mm Incremental encoder TTL 2500 incr./rev. with parallel key, Tolerance N without holding brake Degree of protection IP65 with sealing ring compatible wit

SIMOTICS L Secondary section for linear motor 1FN3... Size 300; Component 3-phase synchronous motor; length 184mm

SIMOTICS L primary section; Component 3-phase synchronous motor; Peak load version; Connection of power and signal in one cable; Cover prepared for a cable gland; FN=1930N; Fmax=5180N; Vmax FN=275m/min; Vmax Fmax=120m/min; In=18.8A; Imax=55.3A When using

SIMOTICS L primary section; Component 3-phase synchronous motor; Peak load version; Connection of power and signal in one cable; Cover prepared for a cable gland; FN=8100N; Fmax=20700N; Vmax FN=203 m/min; Vmax Fmax=88 m/min; In=60.6A; Imax=170.3A When usi

CP 1430 TCP COMMUNICATION FOR SIMATIC

160A 690V, 4P NF SW W/BLK HANDLE

Switch disconnector 125 A, Size 2, 4-pole Front operating mechanism left Basic unit without handle flat terminal incl. phase barriers

Switch disconnector 160 A, Size 2, 3-pole Front operating mechanism center Basic unit without handle Box terminal

3-pole switch disconnector I=400 A, U=690 V Front rotary operating mechanism without handle

Switch disconnector with fuse in new design Iu=125 A, Ue = 690 V, 3-pole for LV HRC fuse Sz. 00 basic version without 8UC6 handle and shaft

Switch disconnector with fuse in new design Iu=160 A, Ue = 690 V, 3-pole for LV HRC fuse Sz. 00 basic version without 8UC6 handle and shaft

Switch disconnector with fuse in new design Iu=250 A, Ue = 690 V, 3-pole for LV HRC fuse Sz. 1 and 2 with door operating mechanism 8UC7 Handle dark blue/blue-green Basic masking frame light gray

SWITCH DISCONNECTORS WITH FUSES I=400A, U=690V, 3-POLE BASIC VERSION,WITHOUT OPERATING MECHANISM WITH LYRE-SHAPED CONTACTS

Switch disconnector with fuse in new design Iu=400 A, Ue = 690 V, 3-pole for LV HRC fuse Sz. 1 and 2 basic version without 8UC6 handle and shaft

FUSE SEPARATOR FOR SWITCH DISCONN. 3KL/M 50- NEW DESIGN CONSISTS OF 5 PIECES

MAIN CONTR.-/EMERG.STOP SWITCH TRIPLE-POLE MAINTENANCE AND REPAIR SWITCH FLUSH-MOUNTING, W/O FRONT PLATE ROTARY ACTUATOR LOCKABLE 25A AC1, 660V/8KW AC3, 380V

SENTRON, Switch disconnector 3LD, emergency switching-off switch, 4- pole, Iu: 16 A, operating power / at AC-23 A 400 V: 7.5 kW, floor mounting with door coupling, rotary operating mechanism, Red / yellow, 4-hole mounting of the handle, without tolerance compensation, Installation dimension 107 mm

SENTRON, 3LD switch disconnector, main switch, 6- pole, Iu:25 A, Operational power / at AC-23 A at 400 V: 9,5 kW, front-mounted, rotary operating mechanism, black, 4- hole mounting of the handle

SENTRON, Switch disconnector 3LD, emergency switching-off switch, 3- pole, Iu: 32 A, operating power / at AC-23 A 400 V: 11.5 kW, front-mounted, rotary operating mechanism, Red / yellow, 4-hole mounting of the handle